Kaidi Chemical self-developed by the production of KD-L313 metal cleaning products from a variety of powerful features compatibility surfactants and other additives made by the scientific compounded, thoroughly wash metal and all kinds of oil left after machining, in order to successfully carry out the subsequent fine machining process, the corrosion rate is almost zero, the cleaning rate of 99.9%. Non-toxic non-corrosive, safe, non-irritating ingredients, contaminated fluid rapidly degraded, do not pollute the environment, is a new generation of environmentally friendly products. Avoid the traditional thermal cleaning and solvent cleaning ills, by the majority of users. Technical indicators: Appearance: light yellow liquid pH ?? Value:? 8.0-9.0 (5% solution) Relative density:? 1.00 to 1.10 ???????? ?? rust resistance [35 ± 2 ℃ RH (95 ± 2)% 24h]: Cast ≤1 level Usage: 1, the FDA should carefully read the product instructions, and under guidance of the professionals use. 2, the cleaning method can be hot soak, ultrasonic cleaning, hand wipe and so on. 3, when used according to the severity of the oil to the deployment of cleaning fluid concentrations, typically 5-30 times the stock solution was diluted to use. Hand-wipe cleaning detergent concentration is relatively higher. Can be used at room temperature, but at 55 ~ 80 ℃ temperature of the cleaning, the best results. 4, thermal immersion method, with a good concentration of 5% to 10% of the cleaning solution is heated to 55 ~ 80 ℃, 5 to 15 minutes after the cleaning (cleaning properly shake the workpiece, cleaning better), with pure water / water rinse and then drying. 5, ultrasonic cleaning, dilution of 20-30 times better cleaning effect can be obtained. The KD-L313 metal cleaning agent oil heated to 55 ~ 65 ℃, clean 2 to 5 minutes, with pure water / water rinse and then drying. Note 1, the severity of adjusting the concentration of the cleaning liquid oil according to the workpiece after cleaning rinse thoroughly. 2, promptly ruled out the surface slick bath, to avoid secondary pollution. 3, the cleaning of the workpiece may not overlap, you should regularly add 1% to 3% of the cleaning agent every day, such as cleaning can not reach its original level after capacity supplemented, replaced with new fluid can be discarded. Packaging: 25 kg, 200 kg of packaging; Shelf life: two years. If the product needs and questions, please contact Kaidi Chemical Industrial Cleaning Division of Technology Centres cleaning solution and pricing. Manufacturers supply directly to the customer's plant (Shandong Metal cleaning agent brand products, metal cleaning agent Jinan brand products, Zibo metal cleaner brand products, Dongying metal cleaner brand products, Hebei metal cleaner brand products, Tangshan metal cleaner brand products Baoding metal cleaner brand products, Shijiazhuang metal cleaner brand name products, brand-name products in Wuxi metal cleaning agent, metal cleaning agents Changzhou brand products, metal cleaning agent brand products of Inner Mongolia, Xinjiang metal cleaner brand products), product quality and technical strength one hundred there are a hundred points is guaranteed!